JB/T 15201-2025 English PDF - Cold stamping machine standard
Printing machinery—Cold stamping machine
Standard Details
JB/T 15201-2025 (English Version)
- English translated version
- Sent to your email in 24h
JB/T 15201-2025 (Chinese Version)
- Chinese original version
- Sent to your email in 12h
Standard Introduction
This document specifies the equipment types, structural composition, basic parameters and technical requirements of cold foil stamping machines, describes the corresponding test methods, and stipulates the inspection rules, instruction manuals, product certificates, nameplates, markings, packaging, transportation and storage.
This document is applicable to the manufacture of cold foil stamping machines integrated with printing lines; the manufacture of cold foil stamping machines with independent functions shall be used for reference.
This document is not applicable to digital cold foil stamping machines.
Standard Catalog
The standard consists of the following main sections:
Foreword
1 Scope
2 Normative References
3 Terms and Definitions
4 Equipment Types, Structural Composition and Basic Parameters
4.1 Equipment Types
4.2 Structural Composition
4.3 Basic Parameters
5 Technical Requirements
5.1 Mechanical Performance
5.2 Foil Stamping Performance
5.3 Unwinding and Rewinding Devices
5.4 Impression Device
5.5 Curing Device
5.6 Safety Protection
5.7 Electrical Quality
5.8 Appearance Quality
6 Test Methods
6.1 Test Conditions
6.2 Test Materials
6.3 Measuring Instruments
6.4 Mechanical Performance
6.5 Foil Stamping Performance
6.6 Unwinding and Rewinding Devices
6.7 Impression Device
6.8 Curing Device
6.9 Safety Protection
6.10 Electrical Quality
6.11 Appearance Quality
7 Inspection Rules
7.1 Factory Inspection
7.2 Type Inspection
8 Instruction Manual, Product Certificate, Nameplates and Markings
9 Packaging, Transportation and Storage
9.1 Packaging
9.2 Transportation
9.3 Storage
Annex A (Informative) Structural Schematic Diagrams of Main Components and Detection Methods
A.1 Structural Schematic Diagrams of Main Components
A.2 Detection Methods
Annex B (Informative) Cold Foil Stamping Standard Test Pattern
Figure 1 Schematic Diagram of Foil Stamping Interval Measurement
Figure A.1 Offset Cold Foil Stamping Machine
Figure A.2 Flexographic Cold Foil Stamping Machine
Figure A.3 Screen Printing Cold Foil Stamping Machine
Figure B.1 Offset Cold Foil Stamping Machine
Figure B.2 Flexographic Cold Foil Stamping Machine
Figure B.3 Screen Printing Cold Foil Stamping Machine
Table 1 Basic Parameters of Various Types of Cold Foil Stamping Machines
Table 2 Requirements for Foil Stamping Clarity
Table 3 Assembly Accuracy Requirements for Main Components of Impression Device
Table 4 Requirements for Appearance Quality
Table 5 Printing Machines Connected with Cold Foil Stamping Machines
Table 6 Test Materials
Table 7 Factory Inspection Items
Table 8 Requirements for Various Markings
Table A.1 Detection Methods for Assembly Accuracy
English Version Preview
Preview of the English translated version (about 5 pages):
Chinese Version Preview
Preview of the original Chinese version (about 5 pages):