JB/T 15200-2025 English PDF - CIC lithographic printing press standard

Standard Catalog

The standard consists of the following main sections:

• Foreword

• 1 Scope 

• 2 Normative References 

• 3 Terms and Definitions 

• 4 Structure, Basic Parameters, Nomenclature and Model 

• 4.1 Structure 

• 4.2 Basic Parameters 

• 4.3 Nomenclature and Model 

• 5 Technical Requirements 

• 5.1 Idling Performance 

• 5.2 Printing Performance 

• 5.3 Drying (Curing) Performance 

• 5.4 Winding Performance 

• 5.5 Safety Protection 

• 5.6 Electrical Quality 

• 5.7 Appearance Quality 

• 5.8 Assembly Accuracy of Main Components and Parts 

• 6 Test Methods 

• 6.1 Test Conditions 

• 6.2 Test Materials 

• 6.3 Measuring Instruments 

• 6.4 Idling Performance Test 

• 6.5 Printing Performance Test 

• 6.6 Drying (Curing) Performance 

• 6.7 Winding Performance 

• 6.8 Safety Protection Inspection 

• 6.9 Electrical Quality Test 

• 6.10 Appearance Quality Inspection 

• 6.11 Inspection of Assembly Accuracy of Main Components and Parts 

• 7 Inspection Rules 

• 7.1 Ex-factory Inspection 

• 7.2 Type Inspection 

• 8 Operation Manual, Product Qualification Certificate, Nameplate and Markings 

• 9 Packaging, Transportation and Storage 

• 9.1 Packaging 

• 9.2 Transportation 

• 9.3 Storage 

• Appendix A (Normative)

• Assembly Accuracy and Inspection Methods of Main Components and Parts 

• Appendix B (Informative)

• Printing Test Plate 1

• Appendix C (Informative)

• Positions of Noise Measuring Points

• References

• Figure 1 Schematic Diagram of Register Error Detection 

• Figure B.1 Schematic Diagram of Printing Test Plate

• Figure C.1 Schematic Diagram of Measuring Point Positions

• Table 1 Basic Parameters 

• Table 2 Requirements for Longitudinal and Transverse Register Errors 

• Table 4 50% Dot Gain Value 

• Table 5 Appearance Quality Requirements 

• Table 6 Ex-factory Inspection Items 

• Table 7 Requirements for Various Markings 

• Table A.1 Requirements for Assembly Accuracy of Main Components and Parts 

• Table A.2 Inspection Methods for Assembly Accuracy